What are the Best Features of a High-Quality GPS Antenna?

boat antenna gps

If there is one technological equipment that is constantly being worked on for improvements, additional features, enhanced accuracy, and precision, it has to be the GPS antenna. This is one piece of technology that is of prime importance to the marine crews, anglers, boatmen, travelers, and many other types of users who require precise navigational data.

GPS sensors found in the market today usually come with more than 40 channels. It is not unusual that they come with MSA S satellite decoding features, and sometimes they are even coupled with technologies that are so advanced and pioneering such as the EGNOS and the WAAS. Users of GPS-enabled devices can take good advantage of this state-of-the-art technology in deriving pinpoint accuracy, at around 3 meters or better.

There is a growing number of devices and equipment that are integrating the GPS technology and system in their production, examples of which are cruise ships, luxury vehicles and chances are high that your handy smartphone comes with a GPS technology, too.

boat antenna gps

One gauging factor that will help us determine if a GPS sensor is efficient enough is if it can manage to generate uninterrupted signal access from satellites.

One of the characteristics of a good GPS sensor is that they can obtain radio broadcast signals from around 30 satellites. This works to the advantage of the user which allows him to derive very precise information. Hence, it is safe to conclude that the more satellites are used for obtaining the needed navigational data, the greater are the odds that the readings will be highly accurate.

This also goes to show that devices that come with a much stronger signal collection capacity are likely to provide better reception between a GPS device and the satellite.

Be that as it may, it is a natural tendency for a signal to get jammed or scrambled. This is most likely to happen when you are surrounded by a thick canopy of forest cover in that area where you are nestled or are traveling in.

On the contrary, ordinary objects that are in your immediate surroundings such as buildings or even your car windshield have the potential of creating signal interruptions or interferences for GPS devices. For anglers and sailors that are constantly traversing little or less traveled waters, they are usually left contending with an array of issues concerning GPS data management.

If you are aiming to further intensify your signal density to increase your chances of obtaining even more precise results, a highly effective GPS sensor would be of substantial help. The use of an external type of GPS antenna can be extremely helpful because it will allow your device to collect satellite signals regularly.

It is not unusual for a GPS device to access at least a minimum of 8-12 satellites at a time. With the help of GPS sensors, the presence of additional satellites can be easily detected which will work to the advantage of the user since it will give way for his device to obtain even more accurate readings.

Some GPS sensors that can be found available in the market nowadays support Seatalk and NMEA2000. They are known to provide networking options that come in the form of a backup GPS device. They can also serve as a primary alternative if you happen to have a multifunctional display device.

The majority of earlier generation of GPS antennas were very sensitive and are thus extremely prone to signal interference and jamming.

Today, so much improvement can be seen done on this type of device to address those setbacks. Before, you can only mount them on poles and horizontal surfaces. But now, with the help of the latest advances in GPS systems, the very design they come in allow you to mount them even on multiple surfaces and platforms.